The Cheap Alternative: Buying Hardwood Floors Wholesale

A lot of people decide not to go with hardwood floors because they are rather expensive. In fact, when you compare their price to cement, hardwood floors are priced higher by around 20% to 30%. 

Why is this so? Hardwood floors come from organic and exhaustible materials. In addition, it takes years for an oak tree (the common source of hardwood) to fully mature, so technically, its preparation is more tedious. Concrete takes only a few hours to make and it doesn't usually require heavy human labor. On the other hand, there are a lot of people involved in producing the final hardwood floor plank.

However, this doesn't discount the fact that hardwood floors are still the best way to go. Not only do they make the room cooler, but they actually give it a more natural look. Concrete makes a room look very contrived, which is a no-go for claustrophobes and a pain to deal with during extreme heat.

Hardwood floors are expensive, yes, but they are not impossible to obtain. You can purchase hardwood floor materials on discount from hardware stores, or you may buy them wholesale. If you're building an entire house, wholesale is your best option. It might be expensive at first, but it is a one time shell-out that, when calculated, is a lot cheaper in the long run. If you buy hardwood floor planks by the piece, then you're setting yourself up for a huge expense. 

Wholesale hardwood floors are available in any wood and hardware store, so they're not difficult to find. Literally defined, wholesale hardwood floors are planks bought in bulk. And aside from being a cheaper option, getting them wholesale will spare you from the hassle of having to go to the store again to keep buying more boards. 

Most stores offer free delivery of hardwood floors, especially if they are bought wholesale. Transporting these wood planks is no joke, that's why stores are more than willing to do the delivery for wholesale orders at no extra cost. 

Should You Buy Unfinished Hardwood Flooring?

Many home building do it yourself prefer to buy their materials in their most basic and purest form to preserve the idea of really starting from scratch. Thus, when it comes to flooring, these people opt to get unfinished hardwood, so eventually they can proudly say that they the finished product is something they had labored over.

But, pride aside, there is no convenience to buying unfinished hardwood floors. For one, purchasing it bare is just the first step of many. You will still have to sand it, apply finishing, stain it, wax it, and, for some, apply preservatives. And that's not to include the installation process itself, which involves a lot of heavy sawing, nailing, and others. 

This is not to say that using unfinished hardwood materials is a zero-sum option. However, it would be a LOT convenient to just buy prefinished material and forget about all the hassles prior to installation. You do away with many time-delaying steps and get closer faster to the hardwood flooring look you desire.

Some argue that a limited budget is what pushes them to buy hardwood unfinished. But when you tally the total short-term and long-term costs, you will see that you gain more savings with a prefinished board because no longer will you have to worry about labor costs. Everything is already there in one easy to use package. The installation process is another story, however.

So, should you buy unfinished hardwood flooring? If you're a purist and have the money to spare, yes. Otherwise, prefinished hardwood floors are the way to go. Spare yourself from the headaches and opt for prefinished materials, instead. 

Sanding Your Hardwood Floor

For do-it-yourself, probably the most annoying part of hardwood flooring installations is the part where the floor is to be sanded. See, because there is never any precision or accuracy when you're dealing with an organic material like wood, having uneven plank heights and gaps is inevitable. And when this happens, your only option is to sand that area down to even levels. 

There are different kinds of sanding machines. There's the drum sander and there's the orbital sander. The orbital sander is said to be easier to use and more reliable, but the drum sander is more commonly available. If buying your own sander is not an option, you can rent it from floor installation specialists, who will also be willing to teach you how to operate it.

The best sandpaper for new floors is 20 grit, but you can change to higher grits once you've got the initial sanding job done. Sanding experts say the best way to sand your hardwood floor is by using just one direction and going from right to left. This is because sanders are unevenly constructed, with the left acting as the 'digger' and the right part as the 'sweeper'. Surely you wouldn't want to sweep first before cutting through the excess wood. 

Expect to have quite a workout while you sand your floor because the machine is not a cinch to handle. It can be very heavy and will require force on your part to control its direction. If you just leave it to its element, it could run around toward unpredictable directions and cause damage instead of result in smoothness for your floor.

It is for this reason that sanding is not something that you should experiment with. If you value your hardwood floor, get information on the right sanding techniques first before you take the plunge. If this proves too tedious for you, then just hire professionals sanders to do the job. It's better to spend on professional services than end up shelling out a greater amount because you've sanded your floor the wrong way.

Overall, all woodwork's require sanding if you are to expect zero splinters and total smoothness. If you don't want to go through all this work, just go with prefinished hardwood flooring. It's a little more expensive but it's a small price to pay for the convenience. 

How To Lay A Replacement Hardwood Floor Board

If a particular plank on your hardwood floor is beyond repair, your best option would be to replace the board with a new one. You might initially think that floor board replacement is a job that is reserved only for the professionals. In fact, laying a floor board is actually something you can do yourself, given the right tools and the proper instructions. 

There are hardware stores that sell bundled packages for do it yourself hardwood floor replacement projects. They even come with step by step instructions to help even the most inexperienced of floor layers easily understand and follow. So, when your plank needs relaying, have no fear. Instructions on how to lay replacement boards are here.

1) Clear the damaged area of all the nails embedded into it. You can do by positioning a nail set over the nail and driving it down as far as possible using a hammer. The purpose of this is to avoiding having the hammer pound against the wood and causing further damage.

2) Once the nails are removed, remove the damaged board by using a wood chisel to pry the affected area out. The absence of the nails should make this process easy, but you still have to be careful not to ruin the adjacent boards.

3) Prepare your replacement plank and try to see if its a perfect fit to the blank spot. If it's too big you will have to make the necessary adjustments.

4) Turn the replacement board over and put construction adhesive. This will enable the plank to stick to the sub floor.

5) Tap the board into place and make sure that it's in the right position. When you have finally decided on its placement, that's when you drive 2-inch nails to secure it. Use a nail set to drive the nails' heads a little below the surface so they don't jot out.

6) Sand the area to even the surface out and apply a finish that matches the rest of the hardwood floor. 

Now you know how to lay a replacement hardwood floor board without paying for professional help. 

How To Clean Your Hardwood Floor

It is easy to build a house using concrete and steel, but it is quite a challenge to do so using wood. You might wonder why this is so, when wood is, perhaps, one of the most common building materials there is around. 

This is because, unlike concrete, wood is an exhaustible resource. Meaning, if nobody plants trees, then it's not likely that we will get any hardwood. And since most of our forest are starting to get depleted, then it is likely that the availability and cost of hardwood would continue to rise over time. Thus, our hardwood floors deserve the best treatment, if we are to expect longevity and stability from them.

So how do we clean our hardwood floors to ensure that they last long enough for the next generations to enjoy and benefit from? Here are some tips you might want to consider. 

First, when cleaning your hardwood floor, make sure that you use a broom that explodes at the ends. A broom with too fine bristles won't trap the dirt and will only have it accumulate within the little cracks and creases. 
Over time, this will damage your flooring and eventually cause wear. You won't be able to notice the changes until the damage becomes apparent. Surely this is something you want to avoid. 

Second, do not use oil based soaps to clean your flooring. There are cleaning liquids made especially for hardwood floors that won't cause damage to their finish. Remember that a finish is what shields your hardwood floor from wear and spills, so must always check if the coat is still thick enough to serve its purpose. 

Third, do not leave standing water or wet rags on your hardwood floor. If this is too late, you can choose to either sand the affected area or replace the plank where the damage has been done. But if the water has just been these for a short while and your finish is newly done, then you have nothing worry about. Just wipe the wet area with a soft dry rag and you're good to go.

Cleaning your hardwood floor requires diligence on your part, because, well, hardwood floors deserve to be maintained properly. They bring stability and sturdiness to your living space. The least you can do is to make sure it is cared for properly. 

Saving Your Hardwood Floor From Water Damage

It is painfully inevitable. No matter how much you try to protect your hardwood flooring from stains and damage, at some point or another, someone will spill something on floor. When this happens, there's no reason to go ballistic. 

If you have been diligently checking your floor's finishing, then  spilling water or any form of liquid into it should not be too much of a problem, so long as you wipe the spill up immediately. But if you're floor coating has thinned and liquid has been there for quite a while, that's when you should start to think of restoration strategies.

Hardwood floor's number one enemy is water. Your floor's luster is at its mercy. You can easily remedy this by mopping the affected area. In worse cases, water can seep into the woodwork and result in decay and warping. 

When wiping, use only soft, dry cloth rags. Coarse cleaning materials will scratch the flooring's surface and thin out the finishing. If you're dealing with a puddle, start with the edges of the puddle first and work your way to the middle. 

Some people use steam cleaners to deal with water spills. However, you should realize that not all steam cleaners are compatible with hardwood floors. Neglecting to check compatibility might cause more harm than good to your floor. Also, no matter the nature of a stain, never use wet cloths for clean-up. Even slightly wet mops are a no-no, especially for hardwood floors that are sealed and coated with wax. 

Finally, your best defense against the hassle of dealing with water stains is to be careful. But you really can't put all your eggs into just protecting your floor from water. As mentioned earlier, liquid stains are inevitable. Thus, foresight is your friend. Ensure that your floor is waxed regularly and the finishing reapplied from time to time. 

Getting Rid Of Stains On Your Hardwood Floor

The most common and, perhaps, annoying damage to your precious hardwood floor are stains. Be they ink stains, water stains, or whatever, the fact that that particular stain was caused by someone's negligence and not because of normal, time-driven wear makes us feel a little cross. This is because stains are very evident and, for serious cases, may force us to replace the entire wood board altogether. 

But when you see a stain on your hardwood flooring, you shouldn't panic just yet. It could be a damage that can be addressed by minor repair methods and without having to call in and pay for professional help. There are certain hardwood floor stains that you can repair yourself. 

For instance, if there is a huge water mark on your floor, you might be tempted to replace the entire plank to get rid of it. This is not always the remedy. You should first try if it's a problem that can be remedied by sanding and refinishing the affected spot. 

Taking care of a small spot yourself will not be a nuisance, compared to changing the entire surface. However, if the stain is really not manageable, you may still attempt at doing the replacement job yourself. 

The first thing you should do to get rid of stain is to come up with an oxalic acid crystal solution, which will be dabbed onto the stained area. Oxalic acid acts as a bleaching agent and can get rid of minor stains. If the stain is not bleached out the first time, you can repeat the procedure for several times more until the stain is gone. Make sure you wear protective gloves, though, as the oxalic acid might be too harsh for your skin.

After you apply oxalic acid, you should return your floor to its usual acidity rinsing it with vinegar. The one you find in your kitchen will do. Of course, you will need to wipe the area dry of excess moisture and allow it completely dry first before you leave it alone. The result should be bleached but stain-less finish. 

Finally, choose an oil-based stain you can apply to the bleached surface to get the original look of your hardwood floor. You may do a number of applications before you get your desired shade. However, before you decide on which stain shade to buy, make sure first that it is compatible with the rest of the floor's color and the kind of wood your floor is made of. 

Hardwood Floor Installation Tips

Most of us think that because hardwood floors are a rather sensitive and expensive material, we should always seek the help of professionals to get them installed. 

Thus, it is comforting to know that with the right tools and the right kind hardwood, it is pretty much a do it yourself endeavor. And because pre- finished hardwood floor planks are already available in hardware stores and instructional manuals everywhere, then you really have nothing to worry about.

How do you install hardwood flooring? First, decide whether you want to use oak, maple or cherry, or rustic ash. Oak is the most expensive kind of hardwood material, but it is reputably the best and the sturdiest. If you're working under a particular budget, maple or rustic ash are also okay and will last as long as oak with proper care and maintenance.

Next, prepare the following materials: the hardwood planks, a vapor barrier paper, a pry bar, a hammer, a speed drill and drill bits, a pneumatic flooring pack (which consists of a nail gun, staples, a mallet, a hose, and an air compressor), a staple gun, a tape measure, a chalk line, and, of course, your how-to manual. 

It would be wise to study the manual before you go about hammering away so you don't waste time. Some hardware stores already have prepackaged hardwood installation necessities so you can avoid the hassle of looking for each piece. Of course, you shouldn't forget your safety goggles and gloves, as all the drilling and hammering could produce wood dust and can be harmful when inhaled. 

Before buying hardwood floor planks, measure the surface where you are going to install them. Order planks that are around 10 to 15 inches bigger to allow room for errors. Expect that your initial attempt will be very challenging, but once you get that first plank in place, the rest should be a breeze. 

Get rid of squeaks by tightly nailing the hardwood plank into the sub floor  When cutting, always provide extra space. When you're dealing with hardwood floors, it's best to go over and make the necessary adjustments than be left with a space that would look awkward to fill.

If you got a pre-finished hardwood floor, then the job is done after you've installed the planks in place. But if you bought wood in its purest form, you should also pre-equip yourself with sanding and finishing tools and prepare for another challenging task ahead.